Other
Will these Other work with your Bass?
Ask Frankie, our Bass Tech.
7 Item(s)
Page: 1 of 1
Frequently Asked Questions
Question: Where Can I Buy Other?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
9v Volt Gotoh Top Mount Battery Compartment
$23.38Gotoh 9v Volt Top Mount Battery Compartment
Gotoh 9-Volt Deluxe Battery Compartment, Access door, Black, 2-3/16" x 1" . Has a 4-screw mounting flange. Built-in terminals and lead wires. Mounting surface must be at least 1-1/4" x 2-1/2" (31.75mm x 63.50mm) and 1-1/2" (38.10mm)...CruzTools - Bass Player Tech Kit
$57.95The GrooveTech kit provide everything you need to work on your bass, and an Easy Setup Guide is included that takes the mystery out of it.
Have tool kit; will travel. Bass players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a substantial upgrade in your performance can be realized with a properly set up axe. The GrooveTech kit...Cruz Tools GrooveTech Jack and Pot Wrench
$16.95The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...CruzTools GrooveTech - Standard Truss Rod Driver
$11.95Standard Driver provides firm contact over the entire slot width for damage-free adjustment.
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....CruzTools GrooveTech - Cheater Truss Rod Driver
$11.95The Cheater Driver allows quick minor adjustment without removing the neck
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....CruzTools GrooveTech - Guitar/Bass Multi-Tool - 2nd Generation
$16.95The first multi-tool for guitars and basses that's actually useful, without unnecessary gimmicks.
New Second Generation Design Introduced in 2008 - the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. Despite...