Accessories

Control Plate for Jazz Bass , Black
Control Plate for Jazz Bass , Black

Control Plate for Jazz Bass, Chrome
Control Plate for Jazz Bass, Chrome

Sprague Orange Drop 0.047µF Capacitor
.047µFd 100V +/-10%

The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...

Gold ElectroSocket
Allparts ElectroSocket jackplate Gold, With Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Anodized...

Fits standard split shaft pots with 6mm diameter. Push-on knobs.
Fits standard split'shaft pots with 6mm diameter. Push-on knobs.

Fits Glockenklang and MEC pots. Secures with set screw.
Fits Glockenklang and MEC pots. Secures with set screw.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Beveled Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw. Dimensions of 3/4"(19.0mm) diameter x 3/4"(19.0mm) height.

Dual Concentric Knob in Chrome or Black
Lusithand Concentric Knob Dual concentric knobs to use with dual-concentric potentiometers. For 8mm ⌀ (bottom)  and 6mm ⌀ (top) shafts.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...

Mono Single Shaft - Push/Pull - 50KB center click
This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive switching for electronic circuits. Threaded section is...

Low-profile, soft-touch, 2 color control knob with integral nut cover
Rubberized plastic knob 63B with marker

Low-profile, hard-touch, 2 color control knob with integral nut cover
Fits standard knurled, split'shaft pot.

Bartolini Black Plastic Push On Concentric Knob Same knob that ships with all Bartolini preamps.

Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment and stability.The total height is 15.6mmThe diameter is 18.7mmThe skirt that covers the nut and washer on the underside is 4mm from the inside bottom surface for a nice clean appearance.
Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment...

2 Set screws. Fits standard split shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split shaft pots for tight fit.
Small Black Aluminum Knob 2 Set screws. Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split'shaft pots for tight fit. 1/4 inch diameter shaft hole. Dimensions for small knob are 0.5"(12.7mm)...

Matches other Aluminum knobs.
Concentric Stacked Black Aluminum Knob Fits pots that have a lower shaft diameter of 8mm and upper shaft diameter of 6mm. Secures with set screw. Lower knob is roughly 3/4"(19mm) wide .3/8"(9.5mm) tall, upper knob is 5/8"(15.9mm) wide, and...

EMG Concentric Single knob for EMG preamps and controls.
EMG single fluted knob. 6mm inner diameter.

EMG Concentric Upper knob for EMG preamps and controls.
EMG Fluted Black Plastic Concentric Knob found on stacked EMG Preamp Controls. Upper knob only.

EMG Concentric Black Plastic Lower Knob
EMG Concentric Black Plastic Lower knob. Inner Diamter 8mm.

Black Knob Set (Qty 3) Fits USA 1/4" (6.3mm) solid shaft pots. Can be stepped down to fit 6mm diameter solid or split shaft pots with brass pot sleeves, BBG 37.
Black Knob Set (Qty 3) With set screws for Jazz Bass, fits USA 1/4" (6.3mm) solid shaft pots.

Fender Concentric Black Plastic Jazz Bass Upper Knob fits 3/16" CTS solid upper shaft concentric pots
Fender black plastic jazz bass upper control knob. Intended for use with Fender stacked CTS 3/16" solid upper shaft potentiometers.

Fender Concentric Black Plastic Jazz Bass Lower Knob fits CTS concentric pots with a 17/64" lower shaft diameter.
Fender black plastic jazz bass lower control knob. Intended for use with Fender stacked potentiometers with a 17/64" lower shaft diameter.

Concentric Dome Knob in Chrome, Black, or Gold
Concentric Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. The concentric knobs have an overall diameter of 20mm (lower),...