Accessories

GruvGear Solo Strap Neo
The new SoloStrap Neo was designed with one thing in mind: To be the most comfortable padded single guitar strap you'll ever own!Comes in two widths: The 4.0 model (4" wide) helps ease the weight of heavier instruments such as basses and solid-body...

The Zero-Mod Thumb Rest for Fender® ’51 and other 50’s years Vintage Precision Reissues, and Telecaster (Tele) basses.
Zero-Mod Vintage Precision / Telecaster Bass Thumb Rest Clear Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" thumb rest fingering positions? Do you have misgivings about drilling holes in your Vintage Reissue P-Bass...

The Zero Mod Thumb Rest for 4 string US Made Sterling Stingray Bass
Zero Mod US MadeSterling Stingray 4 String Thumb Rest Clear From Zero Mod: Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" fingering positions? Do you have misgivings about drilling holes in your US Made...

The Zero-Mod Thumb Rest for Fender® Jaguar basses
Zero Mod Jaguar Bass Thumb Rest In response to demand, we now offer the Zero-Mod Thumb Rest for Fender® Jaguar Basses. This requires NO modification to your Jaguar Bass, and gives you the range and reach of the classic Fender rest....

Aero dBuz Noise Cancelling Cable
Aero dBuz the simple low cost product that every musician should have in their gig bag! 20 ft cable 1/4" phone plug at each end NO modification NO soldering NO...

Labella Deep Talkin’ Bass Gold Flats
Labella Deep Talkin’ Bass Gold Flats From Labella We’re excited to introduce our latest take on the classic flat wound bass string -- La Bella Gold Flats. Our proprietary golden alloy ribbon wire used for the exterior wrap...

The premium Gold Flat Patch Cable is an original design by EBS, and the luxury version of the world renowned PCF Cable.
Gold Flat Patch Cable The premium Gold Flat Patch Cable is an original design by EBS, and the luxury version of the world renowned PCF Cable. This might be the most compact patch cable in the world while offering professional quality signal...

The B245 EMG Pickup Buss is used on two pickup guitars that have a selection switch. The buss provides a convenient way to install either Active or Passive EMG Pickups without soldering.

Orange Drop MoTone Passive Push/Pull Dual Tone Control
Orange Drop MoTone Passive Push/Pull Dual Tone Control By BBG With the push/pull switch in the down position, the Orange Drop MoTone is a standard passive tone using a genuine .047uf Orange Drop capacitor. With the...

Orange Drop RockTone Passive Push/Pull Dual Tone Control
Orange Drop RockTone Passive Push/Pull Dual Tone Control By BBG With the push/pull switch in the down position, the Orange Drop RockTone is an extra subtle passive tone using a genuine .022uf Orange Drop capacitor. With...

The new version of the Alma Compressor takes your tone further… to a place where you can actually hear it!
Lusithand Alma Compressor - MKII The Alma Compressor MKII is an evolution of it's predecessor; it retains all its original elements such as an internal voltage doubling circuit, and a Clean control to be blended with the compressed signal. As...

Lusithand Ground & Pound If you are a Justin Chancellor fan and are aiming at getting closer to his distorted tone, know he is the inspiration behind the existence of the ‘Ground & Pound’. There is no longer the need to use that...

Orange Drop RockTone Passive Push/Pull Dual Tone Control
Orange Drop RockTone Passive Push/Pull Dual Tone Control By BBG With the push/pull switch in the down position, the Orange Drop RockTone is an extra subtle passive tone using a genuine .022uf Orange Drop capacitor. With...

Orange Drop RockTone Passive Push/Pull Dual Tone Control
Orange Drop RockTone Passive Push/Pull Dual Tone Control By BBG With the push/pull switch in the down position, the Orange Drop RockTone is an extra subtle passive tone using a genuine .022uf Orange Drop capacitor. With...

Sadowsky Blue Label Flatwound Bass 5-String Light (40 - 60 - 80 - 100 - 125T)
Sadowsky Blue Label strings were designed for improved midrange presence with less brightness and lower tension feel.Blue Label Flatwound Bass Strings: Superb on fretless basses or for that classic Motown sound. Precision wound on a cello...

Sadowsky Blue Label Flatwound Bass Strings
Sadowsky Blue Label strings were designed for improved midrange presence with less brightness and lower tension feel.Blue Label Bright Nickel bass strings: a bright nickel wrap on a hex core. Warmer than stainless but brighter than other...

Sadowsky Blue Label Bright Nickel Bass Strings
Sadowsky Blue Label strings were designed for improved midrange presence with less brightness and lower tension feel.Blue Label Bright Nickel bass strings: a bright nickel wrap on a hex core. Warmer than stainless but brighter than other...

The Studio Bass Compressor is a studio-grade, classic compressor in a user friendly 4 knob format.
We are not authorized to ship Seymour Duncan products outside of the United States and Canada. Seymour Duncan Studio Bass Compressor Pedal Black This unique Blend knob and 3 way...

D'Addario's NYXL electric bass string sets feature the innovative combination of NYXL nickel-plated wrap wire wound on our NY Steel core for expanded dynamic range and harmonic response.
D'Addario's NYXL electric bass string sets feature the innovative combination of NYXL nickel-plated wrap wire wound on our NY Steel core for expanded dynamic range and harmonic response. Re-engineered core-to-wrap ratios for a more...

Virtuoso Premium Polish is a superior musical instrument care product specially developed for vintage guitars and other musical instruments.
Virtuoso Premium Polish is a superior musical instrument care product specially developed for vintage guitars and other musical instruments. Vintage instruments with nitrocellulose lacquer finishes require more care and attention than modern polyurethane...

GHS Stainless Steal Precision Flatwound Strings
GHS Precision Flats® Bass Strings deliver traditional deep percussive tone due to a unique cross-winding process. They are made with a highly magnetic stainless steel flat wrap for greater volume, longer durability and a smooth satin finish. 4-String...

GHS Bass Brite Flatwound Strings
Ground Roundwound Alloy 52® is very kind to your frets and easy on the fingers. The wrap wire is built up with multiple layers and then micro-ground to exact gauge and smoothness. The perfect sound for all your bass brilliance. 4-String...

Daddario XL Half Round Bass String Sets
D'Addario Half Round bass strings are wound with pure nickel, then precision ground, leaving the outer surface smooth and semi-flat while retaining the flexibility of round wound strings. D'Addario's exclusive heat treating process ensures that Half...

Dunlop Super Bright™ Bass Strings are designed for bass players who want to stand out in the mix with a crisp top end without sacrificing any fundamental.
Dunlop Super Bright™ Bass Strings are designed for bass players who want to stand out in the mix with a crisp top end without sacrificing any fundamental. Carefully designed and tested by our team of bass players, Super Bright Bass Strings...

Marcus Miller Signature String Sets
Marcus Miller, with his groundbreaking style and trademark sound, has created a unique musical voice whose influence on modern bass players is unequaled. For decades, Marcus has refined and strengthened that voice not only by cultivating his...

Sadowsky Blue Label Stainless Steel Bass Strings
Sadowsky Blue Label strings were designed for improved midrange presence with less brightness and lower tension feel.Blue Label Stainless Steel wrap on hex core. Ideal for funk and slap. Designed for top-loading bridges. Not recommended...

Solderlass Volume Passive Tone Control Stack
Solderless Volume / PassiveTone Control Stack By BBG Easilly and solderlessly replace the volume control in your bass with this stacked volume / passive tone control Works with most active or passive basses...

Virtuoso Premium Cleaner is a superior musical instrument care product that were especially developed for vintage guitars and other musical instruments.
Virtuoso Premium Cleaner is a superior musical instrument care product that were especially developed for vintage guitars and other musical instruments. Vintage instruments with nitrocellulose lacquer finishes require more care and attention...

Use with active pickups, EMG...some others
25k Audio Taper Potentiometer, Split Knurled Shaft, with Nut and Washer This pot can be used for: Volume with active pickups like EMG's and others Tone control with active pickups like EMG's and others

500k Audio Potentiometer
Specifications Resistance 500kΩ Body Depth 0.45 in. Body Diameter 0.95 in. Bushing Length 0.25 in. Power Rating 0.33 W Shaft Diameter 0.25 in Shaft Length 0.38 in. Shaft...

250k Audio Potentiometer
Specifications Resistance 250kΩ Body Depth 0.45 in. Body Diameter 0.95 in. Bushing Length 0.25 in. Power Rating 0.33 W Shaft Diameter 0.25 in Shaft Length 0.38 in. Shaft...

On-Off-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/Off/On Specifications Type: mini toggle switch Electrical function: on/off/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

On-On 3-Pole Mini Switch, Chrome
...

Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer
Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer. Metric. Outer (lower) shaft 8mm diameter, inner (upper) shaft 6mm diameter. Outer (lower) shaft 10mm height, inner (upper) shaft 10mm height. Threaded...

On-Off-On Mini Switch, DPDT, With Mounting Hardware
On-Off-On Mini Switch, DPDT, With Mounting Hardware Specifications 5/16" thread bushing height 1/4" diameter hole 5/8" body cavity depth needed Knob portion is 12mm long

This North American built toggle switch is beefy and holds up to the rigors of rock & roll. Available in a black or ivory tip with the specific design being "one size fits all" solderless toggle for all Gibson models. The ease of solderless installation...

The B289 switch is a low profile solderless 3 way toggle switch designed to fit standard Gibson style guitars. All switches use EMG’s "BNOG" connector arrangement and include 2 cables (short & long) for easy connection to EMG’s connection buss....

Noble 25K EQ Pot for Aguilar OBP-1 Stack Treble/Bass or Volume/Volume or Volume/Tone for active EMG pickups

DPTT-MbkFLT1 Mid Switch / Pre-Wired Mid Switch 250/500/800 in Flat Black
DPTT-MbkFLT1 Mid Switch / Pre-Wired Mid Switch 250/500/800 in Flat Black

On-On-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/On/On Specifications Type: mini toggle switch Electrical function: on/on/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

Lusithand NFP Double Jazz Control Plate
Lusithand NFP Double Jazz Control Plate This is a direct replacement plate that will fit most Jazz basses. It's solderless and very easy to install, no need for opening holes for batteries as a single 9v sits perfectly in the cavity. The...

JB plate replacement for Jazz bass with Volume, Blend, Tone, with solderless connections
Richter JB-VBT Preamp - JB plate replacement for Jazz bass The RICHTER JB PASSIVE control plate is an easy mounting component for passive bass guitars like the Jazz Bass TM. It provides a volume pot, an MN taper balance pot and one tone control...

Volume-Volume configuration, solderless, fits most Jazz Basses without modifications.
Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...

800TS Jazzplate
800TS Jazzplate A tibute to the GK800RB amplifier served on a Jazzplate with active/passive switching. Get that signature sound, straight out of your bass. Make it growl, make it deep, make it clear. It’s all there!! Acive...

Volume-Blend configuration, solderless, fits most Jazz Basses without modifications.
Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...

A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
800JP Jazzplate (Volume-Blend) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...

A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
800JP Jazzplate (Volume-Volume) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...

*Stereo version for instruments with stereo outputs or active electronics*
Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...

Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...

Long-threaded jack for mono ?and? stereo applications Nickel
Pure Tone Mono/Stereo 1/4in. Barrel Jack 35 mm (1.38") threaded shaft length / 40 mm (1.57") overall shaft length. This new panel-mount jack boasts full contact for optimal signal and lowest possible noise. Greater surface...

NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...

...

25k Balance Potentiometer for use with active pickups
25k Solid Shaft Blend/Balance Potentiometer

EMG 25k Stack Volume/Volume or Volume/Tone for EMG Active pickups. Solderless
EMG 25k Stack Volume/Volume or Volume/Tone for EMG Active pickups. Comes with concentric knob, output jack, interconnecting cables, and allen key

Comes with concentric knob, capacitor, wiring diagram, and allen key
EMG 25k Stack Volume/Volume or Volume/Tone for EMG Active pickups. Comes with concentric knob, capacitor, wiring diagram, and allen key

25k Ohm Active Balance Control
The ABC is an active EQ accessory that eliminates insertion loss and is designed to work with all our non-X series pickups that use a standard EMG tone pot. Insertion loss is a naturally occurring yet frustrating phenomenon that occurs most frequently...

solderless/modular EMG 25K SPL Control Volume Push Pull Potentiometer
25k Push-Pull pot for use with EMG pickups such as 35,40,45TW or any EMG pickup that requires use of a push pull pot on the Dual Mode pickups that require them.

Alpha 25k Volume Push/Pull Potentiometer
Alpha 25k Audio Taper Volume Push/Pull Potentiometer with 6mm Split Shaft For use with active pickups like EMG

Use with active pickups, EMG...some others
25k Audio Taper Potentiometer, Split Knurled Shaft, with Nut and Washer This pot can be used for: Volume with active pickups like EMG's and others Tone control with active pickups like EMG's and others

Double function potentiometer design is for combining passive tone control with active treble control in a single shaft unit. In active mode the 50KB section with center click is working, in passive mode you will have a 250KA tone roll-off from center click position through anticlockwise.
This special double function potentiometer design is for combining passive tone control with active treble control in a single shaft unit. In active mode the 50KB section with center click is working, in passive mode you will have a 250KA tone roll-off...

250K Push/Pull Audio Taper Potentiometer, With Nut and Washer
250k Push/Pull (DPDT) Audio Taper Potentiometer. Includes nut and washer. This pot can be used for: Volume Push/Pull Active/Passive for onboard preamp systems. Volume with Push/Pull for coil tapping a single dual coil pickup Tone...

Stacked Concentric Pot, 250K/250K, With Nut, Lock and Dress Washer, Metric
Stacked Concentric Audio Taper Pot. 250k/250k. Includes Nut, Lock and Dress Washer. No Detent This pot can be used for: Volume/Volume Stack applications Volume/Tone Stack applications

Dual 25k Blend/Balance MN Taper Pot.Use with active pickups
Dual 25k Blend/Balance MN (linear) Taper Pot, with Center Detent and hardware. Use with active pickups, EMG...some others Technical Specifications: Threaded Bushing Diameter: ~.272" Threaded...

500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer.
500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer. Split-Shaft

500K Audio Pot, CTS
500k Audio Taper Pot. 24 Spline Split-Knurled Shaft with Nut, Lock, and Dress Washer. Threaded bushing is 3/8" tall This pot can be used for: Volume Control Tone Control

500K Volume Pot
500K Mini Pot, Audio Taper, 3/8" Long Bushing, Split, Knurled Shaft with Nut and Washer

Noble 250k MN Taper Blend Pot
Noble - 250 K Blend Pot - Z250K/X250K Blend - aka MN taper - as used in Aguilar preamps New Version *250k MN taper blend pot is standard equipment in Aguilar preamps. (MN taper blend pots are also used in other brands of preamps, such as Glockenklang) **The...

Replacement Volume Push/Pull Active/Passive 500k Potentiometer for Glockenklang 2 & 3-band preamps.

50K w/center detent - for active systems
Noble 50K Stacked EQ Linear Taper Potentiometer w/Center Detent for Active Systems Click Here For Dimensional Drawing

Noble - 250 K Blend Pot - A250K/C250K Blend - as used on Nordstrand preamps
Noble 250k AC Taper Blend Pot *250k AC taper blend pot is standard equipment in Nordstrand preamps. (AC taper blend pots are also used in other brands of preamps, such as Bartolini) **The taper of the blend pot is largely a matter of...

250k Audio Pot with hardware
250K Audio Pot, CTS, solid shaft with nut, lock and dress washer. Threaded bushing is 3/8" tall.

Volume Pot (250K - typical)
Volume Pot (250K - typical) Click Here For Dimensional Drawing

50K w/center detent for active systems
Noble 50K Linear Taper Pot w/center detente for active systems Click Here For Dimensional Drawing

250K/500K Stacked, Solid-Shaft, Audio Taper Potentiometer
250K/500K Audio taper, Solid Shaft Potentiometer. Will not work with push on style knobs. 3/8" mounting hole. Top shaft is 3/16"(4.75mm) diameter and bottom shaft is 17/64"(6.75mm) diameter. Will only work with the Fender Chrome Upper, and Black...

EMG 25k Solderless Volume Potentiometer
25k Split-Shaft Volume Pot. Solderless short shaft.

Glockenklang M/N Taper Blend Pot for 2 and 3-band Systems.
Glockenklang M/N Taper Blend Pot for 2 and 3-band Systems. Circuit Board mounted with lead wiring.

On-On Mini Switch, DPDT, With Mounting Hardware
On-On Mini Switch, DPDT, With Mounting Hardware

On-On-On Mini Switch, DP3T, With Mounting Hardware
On-On-On Mini Switch, DP3T, With Mounting Hardware

ElectroSocket Jackplate in Chrome, Black, and Gold
Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...

Jazz Bass Control Plate in Chrome, Black, or Gold
These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...

Long Threaded Barrel Input Jack
Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".

Metal "football" jack plate for Guitar & Bass
Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.

Gotoh 18v Volt Battery Box Compartment
...

Gotoh 9v Volt Top Mount Battery Compartment
Gotoh 9-Volt Deluxe Battery Compartment, Access door, Black, 2-3/16" x 1" . Has a 4-screw mounting flange. Built-in terminals and lead wires. Mounting surface must be at least 1-1/4" x 2-1/2" (31.75mm x 63.50mm) and 1-1/2" (38.10mm)...

X-Series ABCX Active Balance Control
The ABCX is an active EQ accessory that eliminates insertion loss and is designed to work with all our X series pickups that have an active tone pot. Insertion loss is a naturally occurring yet frustrating phenomenon that occurs most frequently with...

Allows you to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.
Pair of Brass Pot Sleeves (Quantity of two) Used to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.

500k audio taper w/ center detent CD500Ka for TCT & XTCT preamps
500k audio taper w/ center detent CD500Ka for TCT & XTCT preamps

Chrome Knurled Upper Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Chrome knurled knob. Set screw mount. Designed to fit concentric solid 3/16"(4.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®. Package includes mounting set screw.

3-Hole Jazz Bass Control Plate
Jazz Bass control plate with three holes for controls. Perfect for building your own 62' Jazz Bass style passive control layout.

Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

Complete UNWIRED KIT with parts to upgrade to a 62 Jazz set-up.
American Vintage 62 Jazz Bass Complete Wiring Kit Everything you need to recreate the legendary 62 Jazz bass wiring on your own Jazz bass. This classic configuration gives you a dedicated volume and tone for each pickup via vintage style...

American Vintage 62 Jazz Bass Pre-wired Control Assembly Pre-wired on our bench for you. Just connect your bridge ground and pickups and go. This classic configuration gives you a dedicated volume and tone for each pickup via vintage style chrome...

1/4 Output Jack
1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer. A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 3/8"...

Sprague Orange Drop 0.047µF Capacitor
.047µFd 100V +/-10%

Black Knurled Lower Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Black knurled knob. Set screw mount. Package includes mounting set screw. Designed to fit concentric solid 17/64"(6.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®

Detent Spring Plate for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Small metal detent spring plate. Mounts under the fastening nut for dual potentiometer to provide tension for the lower control knob and prevent slipping.

Sprague Orange Drop 0.033µFd Capacitor
.033µFd 100V +/-5%

The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...

Fits standard split shaft pots with 6mm diameter. Push-on knobs.
Fits standard split'shaft pots with 6mm diameter. Push-on knobs.

Dual Concentric Knob in Chrome or Black
Lusithand Concentric Knob Dual concentric knobs to use with dual-concentric potentiometers. For 8mm ⌀ (bottom)  and 6mm ⌀ (top) shafts.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Beveled Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw. Dimensions of 3/4"(19.0mm) diameter x 3/4"(19.0mm) height.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...

Mono Single Shaft - Push/Pull - 50KB center click
This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive switching for electronic circuits. Threaded section is...

Low-profile, soft-touch, 2 color control knob with integral nut cover
Rubberized plastic knob 63B with marker

Low-profile, hard-touch, 2 color control knob with integral nut cover
Fits standard knurled, split'shaft pot.

Bartolini Black Plastic Push On Concentric Knob Same knob that ships with all Bartolini preamps.

Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment and stability.The total height is 15.6mmThe diameter is 18.7mmThe skirt that covers the nut and washer on the underside is 4mm from the inside bottom surface for a nice clean appearance.
Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment...

2 Set screws. Fits standard split shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split shaft pots for tight fit.
Small Black Aluminum Knob 2 Set screws. Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split'shaft pots for tight fit. 1/4 inch diameter shaft hole. Dimensions for small knob are 0.5"(12.7mm)...

Matches other Aluminum knobs.
Concentric Stacked Black Aluminum Knob Fits pots that have a lower shaft diameter of 8mm and upper shaft diameter of 6mm. Secures with set screw. Lower knob is roughly 3/4"(19mm) wide .3/8"(9.5mm) tall, upper knob is 5/8"(15.9mm) wide, and...

EMG Concentric Single knob for EMG preamps and controls.
EMG single fluted knob. 6mm inner diameter.

EMG Concentric Upper knob for EMG preamps and controls.
EMG Fluted Black Plastic Concentric Knob found on stacked EMG Preamp Controls. Upper knob only.

EMG Concentric Black Plastic Lower Knob
EMG Concentric Black Plastic Lower knob. Inner Diamter 8mm.

Black Knob Set (Qty 3) Fits USA 1/4" (6.3mm) solid shaft pots. Can be stepped down to fit 6mm diameter solid or split shaft pots with brass pot sleeves, BBG 37.
Black Knob Set (Qty 3) With set screws for Jazz Bass, fits USA 1/4" (6.3mm) solid shaft pots.

Fender Concentric Black Plastic Jazz Bass Upper Knob fits 3/16" CTS solid upper shaft concentric pots
Fender black plastic jazz bass upper control knob. Intended for use with Fender stacked CTS 3/16" solid upper shaft potentiometers.

Fender Concentric Black Plastic Jazz Bass Lower Knob fits CTS concentric pots with a 17/64" lower shaft diameter.
Fender black plastic jazz bass lower control knob. Intended for use with Fender stacked potentiometers with a 17/64" lower shaft diameter.

Concentric Dome Knob in Chrome, Black, or Gold
Concentric Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. The concentric knobs have an overall diameter of 20mm (lower),...

Single Dome Knob in Chrome, Black, or Gold
Single Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. 6mm inner diameter, 18mm overall diameter, and 18mm height.

Fits Glockenklang and MEC pots. Secures with set screw.
Fits Glockenklang and MEC pots. Secures with set screw.

Concentric Dome Knob in Chrome, Black, or Gold
Concentric Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. The concentric knobs have an overall diameter of 20mm (lower),...

Fits standard split shaft pots and solid shaft pots with 6mm diameter. 1 Set screw.
Fits standard split'shaft pots and solid shaft pots with 6mm diameter. 1 Set screw.

These knobs fit on Bartolini,Aguilar,EMG,Nordstrand,Mike Pope,Delano, and other preamps that have stacked (concentric) pots that have a lower shaft of 8mm and upper shaft of 6mm. Secures with set screw.
O-ring two-piece stacked knob. Chrome, Satin, Black and Gold finish available with rubber rings for a no-slip grip. Fits control pots with 6mm top and 8mm bottom shafts. Each section attaches with a set screw.

EBS Flat Patch Cables
The new flat patch cables from EBS are tailored to make possible to reduce space on your pedal board, while maintaining the flexibility of using cables. The flat design also reduce the risk of cable jams, and keep your setup neat and clean. Available...

Cable Split Adapter 1-6
DC Power Split Cables With the power split cables it is easy to distribute the power from an AD-9 to more than one pedal. Features a one-to-six configuration

Cable Split Adapter 1-5 Right Angled
DC Power Split Cables, with 90 degree contacts Power split cables with 90 degrees contacts makes it is easy to distribute the power from an AD-9 to more than one pedal. The angled contacts makes possible to tighten your pedalboard. Features...

Cable Split Adapter 1-5
DC Power Split Cables With the power split cables it is easy to distribute the power from an AD-9 to more than one pedal. Features a one-to-five configuration

The new Y-type insert cable is designed to be used with the Billy Sheehan Signature Drive loops. It features a 1/4" stereo connector at one end, that splits into two 1/4" mono connectors at the other end representing TIP and RING on the stereo...

Cable Split Adapter 1-2 Right Angled
DC Power Split Cables, with 90 degree contacts Power split cables with 90 degrees contacts makes it is easy to distribute the power from an AD-9 to more than one pedal. The angled contacts makes possible to tighten your pedalboard. Features...

Cable Split Adapter 1-6 Right Angled
DC Power Split Cables, with 90 degree contacts Power split cables with 90 degrees contacts makes it is easy to distribute the power from an AD-9 to more than one pedal. The angled contacts makes possible to tighten your pedalboard. Features...

Asymmetric connector
Interconnection Plugs Specially designed interconnection 1/4”-plugs allow you to tighten up your pedal board and to connect to other pedal brands.

Pickup mounting screws (8 pcs.) in Black, Chrome or Gold - 1¼" long. Some manufacturers supply pickup screws with their pickups, some do not...
Pickup mounting screws (8 pcs.) for bass, 1-1/4" long. Available in Black, Chrome, or Gold finish. Some manufacturers supply pickup screws with their pickups, some do not...

Prewired 500KB Volume/ 220KA+220KC Blend Push-Pull Control
Noll Prewired 500k/220K Volume/Blend Stacked Push-Pull Control This items comes aready pre-wired from the manufacturer. This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its...

Dual MN taper blend-balance with center detent.
Bourns 500k MN taper blend 6mm (.236 in.) split shaft potentiometer Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...

Dual MN taper blend-balance with center detent.
Bourns 500k MN taper blend 6mm (.236 in.) solid shaft potentiometer Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...

Dual MN taper blend-balance with center detent.
Bourns 250k MN taper blend 6mm (.236 in.) split shaft potentiometer Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...

15% Audio Taper, Dual Concentric, Center Detent, 19mm Body, 6mm Spline/8mm Slot Shaft (TCT & XTCT Treble/Bass Stack)
15% Audio Taper, Dual Concentric, Center Detent, 19mm Body, 6mm Spline/8mm Slot Shaft (TCT & XTCT Treble/Bass Stack)

C254K/C245K Blend
Noll C254k/C254k Blend Control This special positive/negative audio taper potentiometer allows to combine and blend 2 magnetic pickups without any loss of sound in center click position. The PC board allows for easy solder work. Threaded...

500KB Volume/ 220KA+220KC Blend Push-Pull Control
Noll 500k/220K Volume/Blend Stacked Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...

50KB /100KB+100KB Stacked Control for active use
Noll 50k/100k Stacked EQ/EQ Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Such as Sweepable Mid control. 50KB /100KB+100KB Stacked Control for active use Threaded...

Long Neck Plate Screws in Chrome, Black, or Gold
Long Neck Plate Screws 4-Pack Phillips Head, #8 x 1-3/4"

Short Neck Plate Screws in Chrome, Black, or Gold
Neck Plate Screws (Short) 4-Pack Phillips Head, #8 x 1-3/8"

Nickel, Chrome, Aged Chrome, Black, or Gold Neck Plate
Neck Plate, 4 Hole, for Guitar or Bass. The plate is 2" x 2-1/2". Screw holes are spaced 1-1/2" x 2"

Chrome, Black, or Gold Recessed Neck Screw Bushings (4 pieces)
These neck screw bushings are a perfect solution to bolt on neck constructions that don't utilize a neck plate for joining the neck to the body. Recessed Neck Screw Bushings (4 pieces) For Guitar or Bass, Chrome, Black, or Gold. 19/32"...

Padded Carry Bag for Tone Hammer 500
This padded carrying bag is the perfect fit for the Tone Hammer 500. The side pocket is big enough to fit cables, tuner, or other small accessory items. A detachable shoulder strap makes the bag even easier to carry when you don't have a free hand. It...

Padded Carry Bag for Tone Hammer 350
This padded carrying bag is the perfect fit for the Tone Hammer 350. The side pocket is big enough to fit cables, tuner, or other small accessory items. A detachable shoulder strap makes the bag even easier to carry when you don't have a free hand. It...

We are not authorized to ship Aguilar products outside of the United States and Canada. Please Note:Aguilar Cabinets are items that are not available for free shipping...

Sprague .022µF Orange Drop Capacitor
Sprague 715P Orange Drop Capacitor, .022uf @ 100VDC Orange Drop polypropylene film and foil capacitors have a long history of reliability, quality, and stability. 715P series uses the round profile design. Many audio companies like Mesa/Boogie...

Sprague .1µF Orange Drop Capacitor
Sprague 715P Orange Drop Capacitor, .1uf @ 200VDC Orange Drop polypropylene film and foil capacitors have a long history of reliability, quality, and stability. 715P series uses the round profile design. Many audio companies like Mesa/Boogie...

Sprague .068µF Orange Drop Capacitor
Sprague 715P Orange Drop Capacitor, .068uf @ 100VDC Orange Drop polypropylene film and foil capacitors have a long history of reliability, quality, and stability. 715P series uses the round profile design. Many audio companies like Mesa/Boogie...

Richter Solderless Blend Control Blend pot for Richter electronics for two magnetic pickups. It can be used in conjunction with every BassXX-preamp, or as a great alternative to soldering in almost any active or passive circuit, as all...

The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1205-00 is the perfect option to upgrade the nut on your bass guitar. It is pre-slotted for a quick and simple install.
The PT-1205-00 is the perfect option to upgrade the nut on your bass guitar. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PT-1200-00 is Black TUSQ XL 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass.
The PT-1200-00 is Black TUSQ XL 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL.
The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install.
The PT-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PT-1401-00 is the perfect option to upgrade the nut on your five string bass guitar. It is pre-slotted for a quick and simple install.
The PT-1401-00 is the perfect option to upgrade the nut on your five string bass guitar. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQL-4000-00 is a great option to replace and upgrade the nut on just about any guitar. It is not slotted so this will need to be done.
The PQL-4000-00 is a great option to replace and upgrade the nut on just about any guitar. It is not slotted so this will need to be done. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1654-00 (54x6) is the perfect option to upgrade the nut on your six string bass guitar. It is pre-slotted for a quick and simple install.
The PT-1654-00 is the perfect option to upgrade the nut on your six string bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PT-1425-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install.
The PT-1425-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PT-1600-00 is the perfect option to upgrade the nut on your six string bass guitar. It is pre-slotted for a quick and simple install.
The PT-1600-00 is the perfect option to upgrade the nut on your six string bass guitar. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/4" thick slab of Black TUSQ XL.
The PT-4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/4" thick slab of Black TUSQ XL. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-4125-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/8" thick slab of Black TUSQ XL.
The PT-4125-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/8" thick slab of Black TUSQ XL. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQ-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted to make for a quick and easy install.
The PQ-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted to make for a quick and easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQ-1254-00 is a great option to upgrade the nut on your 4 string bass guitar. It is pre-slotted to make for an easy install.
The PQ-1254-00 is a great option to upgrade the nut on your 4 string bass guitar. It is pre-slotted to make for an easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PQL-2200-00 is a great option to replace and upgrade the nut on your Fender style guitar or bass. This nut is not slotted.
The PQL-2200-00 is a great option to replace and upgrade the nut on your Fender style guitar or bass. This nut is not slotted. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PQ-1425-00 is a great option to upgrade or replace the nut on your five string bass. It is pre-slotted for a quick and easy install.
The PQ-1425-00 is a great option to upgrade or replace the nut on your five string bass. It is pre-slotted for a quick and easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple.
The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple. No matter what type of stringed instrument you have, the nut is one of the most important...

The PQL-1000-00 is a great option to upgrade or replace the nut on your Fender style electric guitar or bass. It is pre-shapped but requires slots to be complete.
The PQL-1000-00 is a great option to upgrade or replace the nut on your Fender style electric guitar or bass. It is pre-shapped but requires slots to be complete. No matter what type of stringed instrument you have, the nut is one of the most...

The PT-1215-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
The PT-1215-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

500KB Volume + 500KA Tone
Noll 500k/500k Stacked Volume/Tone Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 500KB Volume + 500KA Tone Stacked Control Threaded section is M10 x 0.75,...

500KB Volume + 500KA Tone Control (Push/Pull) P 1063
Noll 500kb/500ka Stacked Volume/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...

Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
Bourns 250k audio taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...

Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
Bourns 500k audio taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...

Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
Bourns 250k audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull...

Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
Bourns 500k audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull...

Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
Bourns 1M audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull Switch...

Mini Carbon Element, Solid Shaft.
Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...

Mini Carbon Element, Solid Shaft.
Bourns 500k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...

...

The PQ-1400-00 is a great option to upgrade the nut on your 5 string bass. It is pre-slotted to make for an easy install.
The PQ-1400-00 is a great option to upgrade the nut on your 5 string bass. It is pre-slotted to make for an easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

2x 250KB Volume Control
Noll 250k/250k Stacked Volume Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Volume/Volume 250k Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is...

250KB Volume + 250KA Tone Control (Push/Pull)
Noll 250k/250k Stacked Volume/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...

250KB Volume + 250KA Tone
Noll 250k/250k Stacked Volume/Tone Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 250KB Volume + 250KA Tone Stacked Control Threaded section is M10 x 0.75,...

2x 250KB Volume Control (Push/Pull)
Noll 250k/250k Stacked Volume/Volume Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...

2x 500KB Volume Control (Push/Pull)
Noll 500k/500k Stacked Volume/Volume Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...

GruvGear FretWraps in Small, Medium, Large, and Extra Large
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand...

The GrooveTech kit provide everything you need to work on your bass, and an Easy Setup Guide is included that takes the mystery out of it.
Have tool kit; will travel. Bass players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a substantial upgrade in your performance can be realized with a properly set up axe. The GrooveTech kit...

Standard Driver provides firm contact over the entire slot width for damage-free adjustment.
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The Cheater Driver allows quick minor adjustment without removing the neck
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The first multi-tool for guitars and basses that's actually useful, without unnecessary gimmicks.
New Second Generation Design Introduced in 2008 - the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. Despite...

The patented Planet Waves Bass Pro-Winder is a high-quality peg winder with a built-in string cutter and stretcher.
The patented Planet Waves Bass Pro-Winder is a high-quality peg winder with a built-in string cutter and stretcher. Designed for both vintage and modern style bass tuners it is the ultimate all-in-one bass restringing tool. Hardened steel...

The PQ-1204-00 is the perfect option to upgrade the nut on your4 string Fender Precision style bass guitar. It is pre-slotted so it makes for an easy install.
The PQ-1204-00 is the perfect option to upgrade the nut on your4 string Fender Precision style bass guitar. It is pre-slotted so it makes for an easy install. No matter what type of stringed instrument you have, the nut is one of the most important...

The PQ-1214-00 is the perfect option to upgrade or replace the nut on your 4 string Fender Jazz style bass guitar. It is pre-slotted so it will make for an easy install.
The PQ-1214-00 is the perfect option to upgrade or replace the nut on your 4 string Fender Jazz style bass guitar. It is pre-slotted so it will make for an easy install. No matter what type of stringed instrument you have, the nut is one of...

The PT-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple.
The PT-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple. No matter what type of stringed instrument you have, the nut is one of the most important...

The PT-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
The PT-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQ-1200-00 is TUSQ 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass.
The PQ-1200-00 is TUSQ 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance, playability...

Control Configuration Volume/Passive Tone Stack Blend Description This 2 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the G&L SB2 ® bass. These...

Passive Tone Control Module can easily be added to any one or two pickup preamp, with one volume control, two volume controls, or a blend control and master volume control. The passive tone control will function when the preamp is in active...

Solderles Volume / Passive Tone Stack - Blend Control Configuration Volume/Passive Tone Stack Blend Description The pickup and ground conections are mader to the prewired harness...

2x 500KA Tone or Volume
Noll 500k/500k Stacked Tone/Tone (or, Volume/Volume, or Volume/Tone) Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 500KA Stacked Tone or Volume Control Threaded...

2x 50KB Active Tone Control Center Click
This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 50KB Stacked Active Tone Control Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 6mm lower, 4mm upper. 20mm...

2x 500kA Volume Control (Push/Pull)
Noll 500k/500k Audio Taper Stacked Volume/Volume Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control...

2x 50KB Active Tone (Push/Pull) Control Center Click
Noll 50k/50k Stacked Tone/Tone Push-Pull Control Center Click This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup...

2x 250KA Tone or Volume
Noll 250k/250k Stacked Tone/Tone (or, Volume/Volume, or Volume/Tone)Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 250KA Stacked Tone or Volume Control Threaded...

2x 250KA Tone Control (Push/Pull)
Noll 250k Stacked Tone/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...

Solid brass bass thumbrest. Fits Fender Bass models. Includes mounting screws.
Machined out of solid brass. Hand polished chrome, black, and gold finish available. Fits Fender Bass models. Mounting hardware included.

Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing.
Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing. You no longer have to feed your strings through the retainer and chance scratching your instrument's head...

Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing.
Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing. You no longer have to feed your strings through the retainer and chance scratching your instrument's head...

Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing.
Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing. You no longer have to feed your strings through the retainer and chance scratching your instrument's head...

Add the finishing touch to your through body bass with Hipshot string ferrules. Available in chrome, black, and gold.
Add the finishing touch to your through body bass with Hipshot string ferrules. Available in chrome, black, and gold.

Dunlop Strap Buttons in Nickel, Black, or Gold
Extra Straplock Buttons (for those with many basses but few straps). Two buttons for Dunlop® strap lock system, with screws. This is only the buttons.

Thumb Rest for 4 String Ernie Ball MusicMan ® Stingray Basses
Zero Mod Music Man Stingray Bass Thumb Rest This thumb rest is made out of high quality dead clear polycarbonate or solid black acrylic, and precision CNC made in a machine shop here in the USA. The position and design mean NO NEW HOLES in...

3/8" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

Thumb rest for the Geddy Lee, Mexican, and American Jazz.
In response to requests from Ric owners for a Fender version, we came up with this. Like the Zero Mod for Ric, it requires NO new holes and uses the existing pickguard screw holes to give you a thumb rest with solid feel and great range of position!. The...

1/4" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

1/4" Thick Thumbrest for RickenBacker 4001
If you are a fingerstyle player with a Rickenbacker 4001, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

Nickel, Chrome, Stainless, Black, or Gold Pickguard Screws
Pickguard Screws (20 pieces) Phillips Head, #4 x 1/2" Available in Nickel, Chrome, Stainless Steel, Black, and Gold finishes.

White or Black Felt Strap Button Cushion (2 pc)
Felt Cushions for Strap Buttons (2 pieces). 1/2" diameter, .150" thick. Available in White or Black. Two Cushions for a single bass with two strap buttons.

The Dunlop Straplok System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching.
The Dunlop Straplok System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching. The case hardened steel skin guarantees long life. The same strap can be used with several guitars,...

The Dunlop Strap Lock System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching.
The Dunlop Strap Lock System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching. The case hardened steel skin guarantees long life. The same strap can be used with several guitars,...

All screws are 1.5" (38.1mm) long. Some manufacturers supply pickup screws with their pickups, some do not...
All screws are #4-24, 1.5" (38.1mm) long including the head. Some manufacturers supply pickup screws with their pickups, some do not... Aguilar Pickups - No screws supplied Bartolini Pickups - No screws supplied Seymour Duncan...

Schaller Strap Lock System (2), Assorted finishes; Pull to Release
Schaller Strap locks - 1 pair These new revolutionary S-Locks are silent. They feature one-piece hardened steel strap buttons, aesthetic design, perfect handling, an elegant Lock-Wheel and all former hiccups have been tackled! New and...

Nickel, Black, or Gold Bass String Tree
Bass String Tree Round With Screw

Nickel, Aged Chrome, Chrome, Black, or Gold Strap Buttons
Strap Buttons (2) With Screws Available in Nickel, Aged Chrome, Chrome, Black, and Gold.

Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel.
Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel. Measurements: .125" x .325" x 24" Due to the size/shape of this item, free shipping...

1/2" Thick X 1/2" Wide X 8" Long
One 8" Piece typically adequate for 2 Jazz Style Pickups.  Wondering how to use this? Check out this article on setting your...

1/8" inner diameter, 1/4" outer Diameter. 1/16" Wall
One 2" Piece typically adequate for 4 screws.

24-inch (608mm) Truss Rod
Technical Specifications: Dual Action 4mm Adjustment Wrench Included Adjuster nut has an outside diameter of 0.33"(8.3mm) Wrapped Straight bit (.25") used to route main channel Cove...

1 Rectangular Piece
Black acrylic sheet to be used for back plate. One side is shiny black, the other side is satin black. Each piece sold separately. Each piece sold as a rectangular sheet for you to create a back plate to your own shape/styling needs Each...

Control Configuration Volume Blend Tone Description This 3 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the Fender Jazz ® bass. These prewires...

Control Configuration Volume Volume Tone Description This 3 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the Fender Jazz ® bass. These...

Control Configuration Volume Blend Tone Tone Description This 4 control passive prewire is intended for instruments with 2-pickups, and independent Tone control for each pickup. These prewires...

Control Configuration Volume Volume Tone Tone Description This 4 control passive prewire is intended for instruments with 2-pickups, and independent Tone control for each pickup. These...

Richter JB-VVT Passive Control Plate (Volume - Volume - Tone) with Solderless connections
JB Passive Control Plate with Shielding for Jazz Bass™ :: High Quality Dustproof Pots :: Rugged and Shielded :: :: Quick and Easy Mounting :: No Soldering Required :: The Richter JB PASSIVE control plate is an easy mounting component...

Control Configuration Volume Tone Description This 2 control passive prewire is intended for instruments with a single pickup, and tone control like the Fender Precision ® bass. These prewires are...

Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...

CTS Audio 250k knurled split shaft DPDT potentiometer Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel,...

CTS Audio 500k knurled split shaft DPDT potentiometer Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel,...

Bourns Mini Linear Taper Guitar pots.
Bourns 250k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...

Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
Bourns 500k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...

Bourns Mini Linear Taper Guitar pots.
Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...

We are not authorized to ship Seymour Duncan products outside of the United States and Canada. 100k Linear taper concentric potentiometer with center detent. Used in the EQ section of Seymour...

We are not authorized to ship Seymour Duncan products outside of the United States and Canada. 100k Linear taper potentiometer with center detent. Used in the EQ section of Seymour Duncan...

We are not authorized to ship Seymour Duncan products outside of the United States and Canada. A100K Audio Taper potentiometer for use as a volume or tone control with active Seymour Duncan...

The EMG AB (Afterburner) is a boost you can use instead of your tone or volume knob (does not function as a tone or volume) and activate with our variable gain push/pull pot. When the Push-Pull pot is in the “down” position there is no boost and the...

Mono Single Shaft - Tone Control - 250KA/50KB
NOLL No. P 1030 Passive Tone Control - 250KA/50KB Potentiometer This special double function potentiometer design is for combine passive tone control with active treble control in a single shaft unit. In active mode the 50KB section with...

Mono Single Shaft - Push/Pull - 500KB
NOLL No. P 1020 MONO SINGLE SHAFT - PUSH/PULL 500KB Potentiometer This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...

Mono Single Shaft - Push/Pull - 500KA
NOLL No. P 1021 MONO SINGLE SHAFT - PUSH/PULL 500KA Potentiometer This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...

Mono Single Shaft - Push/Pull - 250KA
NOLL No. P 1022 MONO SINGLE SHAFT - PUSH/PULL 250KA Potentiometer This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...

#3-48 Screws, 1in. length
EMG H Screw and Spring Set #3-48 Screws, 1'' length: Two (2) screws and two (2) springs used for height adjustment on humbuckers mounted onto a pickguard or pickup ring.

Intended for X5 Size Pickups
Mike Plyler Routing Template CNC precision cut from 1/2" MDF - Dimensions - roughly 5" X 8" Template for Bartolini X5 Series Pickups. This routing template is designed for Bartolini X5 pickup *Please Note: The...

Intended for Delano SBC8 Pickups
These SBC8 templates are produced for us by Delano. Material - Transparent PlasticDimensions - roughly 4" X 6.25", Thickness - 1/4"Center line scribed.

Intended for Delano SBC4 and BB 4 String Pickups
These SBC4 templates are produced for us by Delano. Material - Transparent PlasticDimensions - roughly 4" X 6.25", Thickness - 1/4"Center line scribed.

Intended for Delano Xtender 4 String Pickups
These Xtender templates are produced for us by Delano. Material - Transparent PlasticDimensions - roughly 4" X 6.25", Thickness - 1/4"Center line scribed.

Intended for American Standard Size Jazz Bridge Pickups
Clear Acrylic Routing Template- American Std. Neck Sizing Dimensions - roughly 4" X 6", Thickness - 3/16" This routing template is designed for Bartolini 57S Bridge Pickup, All Delano American Standard Jazz 5-String...

Intended for 4, and some 5 String Jazz Bass Bridge Pickups
Clear Acrylic Routing Templates Dimensions - roughly 4" X 6", Thickness - 3/16" Routing Template designed for 4 String and some 5 String Jazz Bridge Pickups *Please Note: The dimensions of...

Intended for 4, and some 5 String Jazz Bass Neck Pickups
Clear Acrylic Routing Templates Dimensions - roughly 4" X 6", Thickness - 3/16" Routing Template designed for 4 String and some 5 String Jazz Neck Pickups *Please Note: The dimensions of the...

Intended for BC Size Soapbar Pickups
Clear Acrylic Routing Templates Dimensions - roughly 4" X 6", Thickness - 3/16" Routing Template designed for Bartolini BC, Nordstrand 4 String BC Soapbar pickups, and others *Please Note: The...

Intended for Delano's 4, and 5 String Xtender D Pickups
These Xtender templates are produced for us by Delano. Material - Transparent PlasticDimensions - roughly 4" X 6.25", Thickness - 1/4"Center line scribed.

Intended for 4, 5, and 6 String P Bass Pickups
Clear Acrylic Routing Templates Dimensions - roughly 4" X 6", Thickness - 3/16" Routing Template designed for Precision "P" Pickups *Please Note: The dimensions of the opening of the template...

Intended for DL5 Size Extended MusicMan Pickups
Clear Acrylic Routing Templates Dimensions - roughly 4" X 6", Thickness - 3/16" Routing Template designed for Bartolini DL5, Delano MC5, & Nordstrand MusicMan "Lakland" and "OLP" pickups *Please...

Intended for MV Ernie Ball Size MusicMan Pickups
Clear Acrylic Routing Templates Dimensions - roughly 4" X 6", Thickness - 3/16" Routing Template designed for Bartolini MV, Delano MC5EB (Ernie Ball Size), Norstrand MM5 (without screw ears), & Seymour Duncan SMB-5a. ...

Intended for Delano Xtender 5, and 6 String Pickups
These Xtender templates are produced for us by Delano. Material - Transparent PlasticDimensions - roughly 4" X 6.25", Thickness - 1/4"Center line scribed.