Accessories

Frankie - Bass Tech Will these Accessories work with your Bass? Ask Frankie, our Bass Tech.

Best Bass Gear stocks a wide variety of accessories from top brands like Hipshot, EMG, Aguilar, Bartolini, and more.
From routing templates to gig essentials and everything in between, you can search here for the accessories you need.

Frequently Asked Questions

Question: Where Can I Buy Accessories?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. Bourns 25k Volume Potentiometer Audio Taper 6mm Split Shaft

    $4.00
    Use with active pickups, EMG...some others
    25k Audio Taper Potentiometer, Split Knurled Shaft, with Nut and Washer This pot can be used for: Volume with active pickups like EMG's and others Tone control with active pickups like EMG's and others
  2. Cruz Tools GrooveTech Jack and Pot Wrench

    $16.95
    The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
    Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...
  3. Bourns 500k MN taper blend 6mm (.236 in.) solid shaft potentiometer

    $8.00
    Dual MN taper blend-balance with center detent.
    Bourns 500k MN taper blend 6mm (.236 in.) solid shaft potentiometer Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...
  4. Bourns 500k MN taper blend 6mm (.236 in.) split shaft potentiometer

    $8.00
    Dual MN taper blend-balance with center detent.
    Bourns 500k MN taper blend 6mm (.236 in.) split shaft potentiometer Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...
  5. Bourns 250k MN taper blend 6mm (.236 in.) split shaft potentiometer

    $8.00
    Dual MN taper blend-balance with center detent.
    Bourns 250k MN taper blend 6mm (.236 in.) split shaft potentiometer Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...
  6. Bourns 500k audio taper mini 6mm (.236 in.) solid shaft potentiometer

    $7.60
    Mini Carbon Element, Solid Shaft.
    Bourns 500k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...
  7. Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer

    $7.60
    Mini Carbon Element, Solid Shaft.
    Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...
  8. Bourns 1M audio taper push/pull 6mm (.236 in.) split shaft potentiometer

    $15.00
    Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
    Bourns 1M audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull Switch...
  9. Bourns 500k audio taper push/pull 6mm (.236 in.) split shaft potentiometer

    $15.00
    Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
    Bourns 500k audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull...
  10. Bourns 250k audio taper push/pull 6mm (.236 in.) split shaft potentiometer

    $15.00
    Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
    Bourns 250k audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull...
  11. Bourns 500k audio taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 500k audio taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  12. Bourns 250k audio taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 250k audio taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  13. CruzTools - Bass Player Tech Kit

    $57.95
    The GrooveTech kit provide everything you need to work on your bass, and an Easy Setup Guide is included that takes the mystery out of it.
    Have tool kit; will travel. Bass players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a substantial upgrade in your performance can be realized with a properly set up axe. The GrooveTech kit...
  14. CruzTools GrooveTech - Standard Truss Rod Driver

    $11.95
    Standard Driver provides firm contact over the entire slot width for damage-free adjustment.
    Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....
  15. CruzTools GrooveTech - Cheater Truss Rod Driver

    $11.95
    The Cheater Driver allows quick minor adjustment without removing the neck
    Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....
  16. CruzTools GrooveTech - Guitar/Bass Multi-Tool - 2nd Generation

    $16.95
    The first multi-tool for guitars and basses that's actually useful, without unnecessary gimmicks.
    New Second Generation Design Introduced in 2008 - the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. Despite...
  17. Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer

    $5.95
    Bourns Mini Linear Taper Guitar pots.
    Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...
  18. Bourns 250k linear taper mini 6mm (.236 in.) solid shaft potentiometer

    $5.95
    Bourns Mini Linear Taper Guitar pots.
    Bourns 250k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...
  19. Bourns 500k linear taper mini 6mm (.236 in.) split shaft potentiometer

    $8.20
    Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 500k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  20. Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  21. CruzTools Stagehand Compact Tech Kit

    $39.95
    CruzTools Bass Stagehand Compact Kit
    Our GrooveTech Tech Kits are the ultimate tool kits for any guitar and bass player, but musicians who want something more portable may now consider the new StageHand kit. It provides comparable capability, yet in a compact package and budget priced. Central...
  22. RockReady UltraStrap 3.5

    $40.00
    3.5" wide, neoprene pad, leather end tab, with adjustable leather tail piece
    UltraStrap A quality, comfortable strap, the RockReady UltraStrap is constructed of leather and neoprene to make a strap that looks good, feels great, and is made to last. The leather tail piece allows for you to make adjustements to find that...

Frequently Asked Questions

Question: Where Can I Buy Accessories?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter