Hardware

Dual Concentric Knob in Chrome or Black
Lusithand Concentric Knob Dual concentric knobs to use with dual-concentric potentiometers. For 8mm ⌀ (bottom)  and 6mm ⌀ (top) shafts.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...

Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment and stability.The total height is 15.6mmThe diameter is 18.7mmThe skirt that covers the nut and washer on the underside is 4mm from the inside bottom surface for a nice clean appearance.
Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment...

2 Set screws. Fits standard split shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split shaft pots for tight fit.
Small Black Aluminum Knob 2 Set screws. Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split'shaft pots for tight fit. 1/4 inch diameter shaft hole. Dimensions for small knob are 0.5"(12.7mm)...

Matches other Aluminum knobs.
Concentric Stacked Black Aluminum Knob Fits pots that have a lower shaft diameter of 8mm and upper shaft diameter of 6mm. Secures with set screw. Lower knob is roughly 3/4"(19mm) wide .3/8"(9.5mm) tall, upper knob is 5/8"(15.9mm) wide, and...

Concentric Dome Knob in Chrome, Black, or Gold
Concentric Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. The concentric knobs have an overall diameter of 20mm (lower),...

Single Dome Knob in Chrome, Black, or Gold
Single Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. 6mm inner diameter, 18mm overall diameter, and 18mm height.

Fits Glockenklang and MEC pots. Secures with set screw.
Fits Glockenklang and MEC pots. Secures with set screw.

Concentric Dome Knob in Chrome, Black, or Gold
Concentric Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. The concentric knobs have an overall diameter of 20mm (lower),...

These knobs fit on Bartolini,Aguilar,EMG,Nordstrand,Mike Pope,Delano, and other preamps that have stacked (concentric) pots that have a lower shaft of 8mm and upper shaft of 6mm. Secures with set screw.
O-ring two-piece stacked knob. Chrome, Satin, Black and Gold finish available with rubber rings for a no-slip grip. Fits control pots with 6mm top and 8mm bottom shafts. Each section attaches with a set screw.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots.
These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. 1 Set screw.
Fits standard split'shaft pots and solid shaft pots with 6mm diameter. 1 Set screw.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - Black EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Black Neck Plate Screws (Short) 4-Pack
Black Neck Plate Screws (Short) 4-Pack Phillips Head, Black, #8 x 1-3/8in.

Black Neck Screw Bushings (4 pieces) Recessed neck screw bushings (4 pieces), for guitar or bass, Black plated. 19/32" hole required, 3mm thick.

Black Neckplate
Neck Plate, 4 Hole, for Guitar or Bass, Black. The plate is 2" x 2-1/2". Screw holes are spaced 1-1/2" x 2"

The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL.
The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1401-00 is the perfect option to upgrade the nut on your five string bass guitar. It is pre-slotted for a quick and simple install.
The PT-1401-00 is the perfect option to upgrade the nut on your five string bass guitar. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

All screws are 1.5" (38.1mm) long.
All screws are #4-24, 1.5" (38.1mm) long including the head.Some manufacturers supply pickup screws with their pickups, some do not... Aguilar Pickups - No screws supplied Bartolini Pickups - No screws supplied Seymour Duncan...

Black Knurled Lower Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Black knurled knob. Set screw mount. Package includes mounting set screw. Designed to fit concentric solid 17/64"(6.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®

#3-48 Screws, 1in. length
EMG H Screw and Spring Set - Black #3-48 Screws, 1'' length: Two (2) screws and two (2) springs used for height adjustment on humbuckers mounted onto a pickguard or pickup ring.

#3-48 Screws, 1in. length
EMG H Screw and Spring Set #3-48 Screws, 1'' length: Two (2) screws and two (2) springs used for height adjustment on humbuckers mounted onto a pickguard or pickup ring.

Black Bass String Tree
Bass String Tree Round With Screw, Black

The Zero-Mod Thumb Rest for 5 String Music Man / Ernie Ball Stingray Bass!
The Zero-Mod Thumb Rest (Black) for 5 String Music Man / Ernie Ball Stingray Bass! This requires NO modification to your Bass, and gives you the range and reach of the classic Fender rest. on your 5 string Stingray. Easy on - Easy off.....Uses...

The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass
The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass. This thumb rest allows you to achieve the range and reach of the classic Fender rest on your 5 string Stingray. Made in the USA Easy on/Easy off No...

Solid brass bass thumbrest. Fits Fender Bass models. Includes mounting screws
Chrome, Black and Gold finish. Solid brass bass thumbrest. Fits Fender Bass models. Includes mounting screws