Potentiometers
Will these Potentiometers work with your Bass?
Ask Frankie, our Bass Tech.Pots | Jacks | Jackplates | Battery Boxes | Battery Holders | Capacitors | Wire | Heat Shrink | Shielding | Switches
Frequently Asked Questions
Question: Where Can I Buy Potentiometers?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
Noble 250k Volume Potentiometer Audio Taper 6mm Split Shaft
$5.75Volume Pot (250K - typical)
Volume Pot (250K - typical) Click Here For Dimensional DrawingNoble 25K EQ Pot for Aguilar OBP-1 Stack Treble/Bass or Volume for active EMG pickups
$20.00Noble 25K EQ Pot for Aguilar OBP-1 Stack Treble/Bass or Volume/Volume or Volume/Tone for active EMG pickups500K-500K Stacked Concentric Pot
$16.00Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer
Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer. Metric. Outer (lower) shaft 8mm diameter, inner (upper) shaft 6mm diameter. Outer (lower) shaft 10mm height, inner (upper) shaft 10mm height. Threaded...Noble 250k Volume/Tone Potentiometer Audio Taper Stack 6/8mm lower Solid Shaft
$20.00Stacked Concentric Pot, 250K/250K, With Nut, Lock and Dress Washer, Metric
Stacked Concentric Audio Taper Pot. 250k/250k. Includes Nut, Lock and Dress Washer. No Detent This pot can be used for: Volume/Volume Stack applications Volume/Tone Stack applicationsAlpha 25k Blend Potentiometer MN Taper 6mm Split Shaft
$16.50Dual 25k Blend/Balance MN Taper Pot.Use with active pickups
Dual 25k Blend/Balance MN (linear) Taper Pot, with Center Detent and hardware. Use with active pickups, EMG...some others Technical Specifications: Threaded Bushing Diameter: ~.272" Threaded...Alpha 500k Volume Potentiometer Audio Taper Push/Pull 6mm Split Shaft
$13.89500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer.
500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer. Split-ShaftAlpha 500k Volume Potentiometer Audio Taper 6mm Split Shaft
$4.79500K Volume Pot
500K Mini Pot, Audio Taper, 3/8" Long Bushing, Split, Knurled Shaft with Nut and WasherAlpha 25k Volume Potentiometer Audio Taper Push/Pull 6mm Split Shaft
$17.31Alpha 25k Volume Push/Pull Potentiometer
Alpha 25k Audio Taper Volume Push/Pull Potentiometer with 6mm Split Shaft For use with active pickups like EMGNoble 250k Blend M/N Taper as used in Aguilar preamps
$8.00Noble 250k MN Taper Blend Pot
Noble - 250 K Blend Pot - Z250K/X250K Blend - aka MN taper - as used in Aguilar preamps New Version *250k MN taper blend pot is standard equipment in Aguilar preamps. (MN taper blend pots are also used in other brands of preamps, such as Glockenklang) **The...Noble 50k EQ Potentiometer Linear Taper Center Detent 6mm Split Shaft
Out of stock
$4.00EQ Pot 50K Linear - for active systems
Noble EQ Pot 50K Linear Taper Potentiometer with Center Detent - for active systems Click Here For Dimensional DrawingNoble 50k EQ Potentiometer Linear Taper Push/Pull Center Detente 6mm Split Shaft
$18.0050K w/center detent for active systems
Noble 50K Linear Taper Pot w/center detente for active systems Click Here For Dimensional DrawingNoble 50k EQ Potentiometer Linear Taper Stacked Center Detent 6/8mm Split Shaft
$18.0050K w/center detent - for active systems
Noble 50K Stacked EQ Linear Taper Potentiometer w/Center Detent for Active Systems Click Here For Dimensional DrawingNoble 250k Blend Potentiometer A/C Taper as used in Nordstrand Preamps
$8.00Noble - 250 K Blend Pot - A250K/C250K Blend - as used on Nordstrand preamps
Noble 250k AC Taper Blend Pot *250k AC taper blend pot is standard equipment in Nordstrand preamps. (AC taper blend pots are also used in other brands of preamps, such as Bartolini) **The taper of the blend pot is largely a matter of...Brass Pot Sleeves (Set of 2)
$2.10Allows you to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.
Pair of Brass Pot Sleeves (Quantity of two) Used to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.
