Accessories

The Zero-Mod Thumb Rest for Fender® ’51 and other 50’s years Vintage Precision Reissues, and Telecaster (Tele) basses.
Zero-Mod Vintage Precision / Telecaster Bass Thumb Rest Clear Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" thumb rest fingering positions? Do you have misgivings about drilling holes in your Vintage Reissue P-Bass...

The Zero Mod Thumb Rest for 4 string US Made Sterling Stingray Bass
Zero Mod US MadeSterling Stingray 4 String Thumb Rest Clear From Zero Mod: Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" fingering positions? Do you have misgivings about drilling holes in your US Made...

The Zero-Mod Thumb Rest for Fender® Jaguar basses
Zero Mod Jaguar Bass Thumb Rest In response to demand, we now offer the Zero-Mod Thumb Rest for Fender® Jaguar Basses. This requires NO modification to your Jaguar Bass, and gives you the range and reach of the classic Fender rest....

The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...

The GrooveTech kit provide everything you need to work on your bass, and an Easy Setup Guide is included that takes the mystery out of it.
Have tool kit; will travel. Bass players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a substantial upgrade in your performance can be realized with a properly set up axe. The GrooveTech kit...

Standard Driver provides firm contact over the entire slot width for damage-free adjustment.
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The Cheater Driver allows quick minor adjustment without removing the neck
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The first multi-tool for guitars and basses that's actually useful, without unnecessary gimmicks.
New Second Generation Design Introduced in 2008 - the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. Despite...

1/4" Thick Thumbrest for RickenBacker 4001
If you are a fingerstyle player with a Rickenbacker 4001, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

3/8" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

1/4" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

Thumb rest for the Geddy Lee, Mexican, and American Jazz.
In response to requests from Ric owners for a Fender version, we came up with this. Like the Zero Mod for Ric, it requires NO new holes and uses the existing pickguard screw holes to give you a thumb rest with solid feel and great range of position!. The...

Thumb Rest for 4 String Ernie Ball MusicMan ® Stingray Basses
Zero Mod Music Man Stingray Bass Thumb Rest This thumb rest is made out of high quality dead clear polycarbonate or solid black acrylic, and precision CNC made in a machine shop here in the USA. The position and design mean NO NEW HOLES in...

CruzTools Bass Stagehand Compact Kit
Our GrooveTech Tech Kits are the ultimate tool kits for any guitar and bass player, but musicians who want something more portable may now consider the new StageHand kit. It provides comparable capability, yet in a compact package and budget priced. Central...

The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass
The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass. This thumb rest allows you to achieve the range and reach of the classic Fender rest on your 5 string Stingray. Made in the USA Easy on/Easy off No...

Ric 4003 2015-2020 retro pickguard Thumb Rest
If you are a finger-style player with a Rickenbacker 4003, you know there is no really good place to "hang your thumb." You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in," and many Rics with the chrome...

Thumb rest for Lakland Joe Osborne, 44-60, Darryl Jones Jazz Bass Models, and possibly others.
This is for the Joe Osborne, 44-60, Darryl Jones editions, but may well fit others. Please see the pic showing measurements . Basically you need 3 and 1/16 inches (screw center to screw center) and clearance from the neck pickup to fit - We believe...

The PB1​V2 - More ergonomic aggressive styling
...

...