Hardware
Will these Hardware work with your Bass?
Ask Frankie, our Bass Tech.Frequently Asked Questions
Question: Where Can I Buy Hardware?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
Zero Mod US Made Sterling Stingray 4 String Thumb Rest Clear
$35.00The Zero Mod Thumb Rest for 4 string US Made Sterling Stingray Bass
Zero Mod US MadeSterling Stingray 4 String Thumb Rest Clear From Zero Mod: Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" fingering positions? Do you have misgivings about drilling holes in your US Made...Zero Mod Jaguar Bass Thumb Rests
$22.00The Zero-Mod Thumb Rest for Fender® Jaguar basses
Zero Mod Jaguar Bass Thumb Rest In response to demand, we now offer the Zero-Mod Thumb Rest for Fender® Jaguar Basses. This requires NO modification to your Jaguar Bass, and gives you the range and reach of the classic Fender rest....Pickup Screws - (Pack of 4)
$3.50 - $5.50All screws are 1.5" (38.1mm) long. Some manufacturers supply pickup screws with their pickups, some do not...
All screws are #4-24, 1.5" (38.1mm) long including the head. Some manufacturers supply pickup screws with their pickups, some do not... Aguilar Pickups - No screws supplied Bartolini Pickups - No screws supplied Seymour Duncan...Zero Mod 4001 Ric Thumbrest
$26.001/4" Thick Thumbrest for RickenBacker 4001
If you are a fingerstyle player with a Rickenbacker 4001, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...Zero Mod 4003 Ric Fatboy Thumbrest
$31.003/8" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...Zero Mod 4003 Ric Thumbrest
$26.001/4" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...Zero Mod Jazz 1 Thumb Rest
$34.00Thumb rest for the Geddy Lee, Mexican, and American Jazz.
In response to requests from Ric owners for a Fender version, we came up with this. Like the Zero Mod for Ric, it requires NO new holes and uses the existing pickguard screw holes to give you a thumb rest with solid feel and great range of position!. The...Zero Mod Music Man Stingray Bass Thumb Rest
$34.00Thumb Rest for 4 String Ernie Ball MusicMan ® Stingray Basses
Zero Mod Music Man Stingray Bass Thumb Rest This thumb rest is made out of high quality dead clear polycarbonate or solid black acrylic, and precision CNC made in a machine shop here in the USA. The position and design mean NO NEW HOLES in...Bass Truss Rod 24" (608mm) Total Length
$20.0024-inch (608mm) Truss Rod
Technical Specifications: Dual Action 4mm Adjustment Wrench Included Adjuster nut has an outside diameter of 0.33"(8.3mm) Wrapped Straight bit (.25") used to route main channel Cove...American Vintage 62 Jazz Bass 3-hole control plate
$34.993-Hole Jazz Bass Control Plate
Jazz Bass control plate with three holes for controls. Perfect for building your own 62' Jazz Bass style passive control layout.Plastic Soft Touch Push-On Knob - 63
$4.00Low-profile, soft-touch, 2 color control knob with integral nut cover
Rubberized plastic knob 63B with markerBlack Plastic Knob Model 57
$3.25Low-profile, hard-touch, 2 color control knob with integral nut cover
Fits standard knurled, split'shaft pot.Large Black Aluminum Knob
$9.50Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment and stability.The total height is 15.6mmThe diameter is 18.7mmThe skirt that covers the nut and washer on the underside is 4mm from the inside bottom surface for a nice clean appearance.
Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment...Small Black Aluminum Knob
$9.002 Set screws. Fits standard split shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split shaft pots for tight fit.
Small Black Aluminum Knob 2 Set screws. Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split'shaft pots for tight fit. 1/4 inch diameter shaft hole. Dimensions for small knob are 0.5"(12.7mm)...Concentric Stacked Black Aluminum Knob
$18.00Matches other Aluminum knobs.
Concentric Stacked Black Aluminum Knob Fits pots that have a lower shaft diameter of 8mm and upper shaft diameter of 6mm. Secures with set screw. Lower knob is roughly 3/4"(19mm) wide .3/8"(9.5mm) tall, upper knob is 5/8"(15.9mm) wide, and...Fender Concentric Jazz Bass Knob - Upper
$5.99Fender Concentric Black Plastic Jazz Bass Upper Knob fits 3/16" CTS solid upper shaft concentric pots
Fender black plastic jazz bass upper control knob. Intended for use with Fender stacked CTS 3/16" solid upper shaft potentiometers.Fender Concentric Jazz Bass Knob - Lower
$7.99Fender Concentric Black Plastic Jazz Bass Lower Knob fits CTS concentric pots with a 17/64" lower shaft diameter.
Fender black plastic jazz bass lower control knob. Intended for use with Fender stacked potentiometers with a 17/64" lower shaft diameter.American Vintage 62 Jazz Bass upper control knob
$14.99Chrome Knurled Upper Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Chrome knurled knob. Set screw mount. Designed to fit concentric solid 3/16"(4.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®. Package includes mounting set screw.American Vintage 62 Jazz Bass lower control knob
$16.99Black Knurled Lower Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Black knurled knob. Set screw mount. Package includes mounting set screw. Designed to fit concentric solid 17/64"(6.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®Zero Mod 5 String Music Man Stingray Bass Thumb Rest
$34.00The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass
The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass. This thumb rest allows you to achieve the range and reach of the classic Fender rest on your 5 string Stingray. Made in the USA Easy on/Easy off No...Zero Mod 4003v2 Ric Thumb Rest
$26.00Ric 4003 2015-2020 retro pickguard Thumb Rest
If you are a finger-style player with a Rickenbacker 4003, you know there is no really good place to "hang your thumb." You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in," and many Rics with the chrome...Zero Mod PBT1 Vintage Precision Telecaster Bass Thumb Rest Clear
$37.00The Zero-Mod Thumb Rest for Fender® ’51 and other 50’s years Vintage Precision Reissues, and Telecaster (Tele) basses.
Zero-Mod Vintage Precision / Telecaster Bass Thumb Rest Clear Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" thumb rest fingering positions? Do you have misgivings about drilling holes in your Vintage Reissue P-Bass...Zero Mod Jazz 2 Thumb Rest
$34.00Thumb rest for Lakland Joe Osborne, 44-60, Darryl Jones Jazz Bass Models, and possibly others.
This is for the Joe Osborne, 44-60, Darryl Jones editions, but may well fit others. Please see the pic showing measurements . Basically you need 3 and 1/16 inches (screw center to screw center) and clearance from the neck pickup to fit - We believe...
