Accessories
Will these Accessories work with your Bass?
Ask Frankie, our Bass Tech.
Best Bass Gear stocks a wide variety of accessories from top brands like Hipshot, EMG, Aguilar, Bartolini, and more.
From routing templates to gig essentials and everything in between, you can search here for the accessories you need.
Items 1 to 30 of 39 total
Page: 1 of 2
Page:
- 1
- 2
Frequently Asked Questions
Question: Where Can I Buy Accessories?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
JEF - Replacement Neck for Jazz Bass - Neck for Bass Guitar
Out of stock
$390.00JEF - Replacement Neck for Jazz Bass®
21 frets (.103" x .045") Maple bass neck with vintage tinted finish Ebony fingerboard with Abalone inlay dots 10" radius Nut width 1-9/16" Heel width 2-7/16" Tuning peg...JEF-F - Replacement Neck for Jazz Bass
Out of stock
$375.00JEF-F - Replacement Neck for Jazz Bass®
20 frets, no fret wire Maple bass neck with vintage tinted finish Ebony fingerboard, no lines, no inlay dots 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole...JEF-FL - Fretless Replacement Neck with Lines for Jazz Bass
Out of stock
$416.50JEF-FL - Fretless Replacement Neck with Lines for Jazz Bass®
20 frets, no fret wire Maple bass neck with vintage tinted finish Ebony fingerboard with lines, no inlay dots 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole...JEO - Replacement Neck with Ebony Fingerboard for Jazz Bass - Neck for Bass Guitar
Out of stock
$284.00JEO - Replacement Neck with Ebony Fingerboard for Jazz Bass®
20 frets Maple bass neck, sanded, unfinished and ready to spray Ebony fingerboard with Abalone inlay dots 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole...JEO-F - Replacement Fretless Neck for Jazz Bass - Bass Guitar Neck
Out of stock
$220.00JEO-F - Replacement Fretless Neck for Jazz Bass®
20 frets, no fret wire Maple bass neck, sanded, unfinished and ready to spray Ebony fingerboard, no inlay dots 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole diameter...PEF - Replacement Neck for Precision Bass - Bass Guitar Neck
Out of stock
$382.85PEF - Replacement Neck for Precision Bass®
20 frets (.103" x .045") Maple bass neck with vintage tinted finish Ebony fingerboard with Abalone inlay dots 10" radius Nut width 1-5/8" Heel width 2-7/16" Tuning peg...PEF-21 - Replacement Neck for Precision Bass - Bass Guitar Neck
Out of stock
$260.00PEF-21 - Replacement Neck for Precision Bass®
21 fret version (.103" x .045") Maple bass neck with vintage tinted finish Ebony fingerboard with Abalone inlay dots 10" radius Nut width 1-5/8" Heel width 2-7/16" Tuning...PEF-F - Replacement Neck for Precision Bass - Bass Guitar Neck
Out of stock
$383.00PEF-F - Replacement Neck for Precision Bass®
20 frets, no fret wire Maple bass neck with vintage tinted finish Ebony fingerboard, no lines, no inlay dots 10" radius Nut width 1-5/8" Heel width 2-7/16" Tuning peg...PEF-FL - Replacement Neck for Precision Bass - Bass Guitar Neck
Out of stock
$416.50PEF-FL - Replacement Neck for Precision Bass®
20 frets, no fret wire Maple bass neck with vintage tinted finish Ebony fingerboard with lines, no inlay dots 10" radius Nut width 1-5/8" Heel width 2-7/16" Tuning peg...PEF-FL-21 - Replacement Neck for Precision Bass - Bass Guitar Neck
Out of stock
$268.00PEF-FL-21 - Replacement Neck for Precision Bass®
21 fret version, no fret wire Maple bass neck with vintage tinted finish Ebony fingerboard with lines, no inlay dots 10" radius Nut width 1-5/8" Heel width 2-7/16" Tuning...Prewired Passive Harness (Volume-Blend-Tone)
$39.00Control Configuration Volume Blend Tone Description This 3 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the Fender Jazz ® bass. These prewires...Prewired Passive Harness (Volume-Volume-Tone)
$35.00Control Configuration Volume Volume Tone Description This 3 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the Fender Jazz ® bass. These...Prewired Passive Harness (Volume-Tone)
$31.00Control Configuration Volume Tone Description This 2 control passive prewire is intended for instruments with a single pickup, and tone control like the Fender Precision ® bass. These prewires are...Prewired Passive Harness (Volume - Blend - Tone - Tone)
$58.00Control Configuration Volume Blend Tone Tone Description This 4 control passive prewire is intended for instruments with 2-pickups, and independent Tone control for each pickup. These prewires...Prewired Passive Harness (Volume-Volume-Tone-Tone)
$48.00Control Configuration Volume Volume Tone Tone Description This 4 control passive prewire is intended for instruments with 2-pickups, and independent Tone control for each pickup. These...Bass Truss Rod 24" (608mm) Total Length
$20.0024-inch (608mm) Truss Rod
Technical Specifications: Dual Action 4mm Adjustment Wrench Included Adjuster nut has an outside diameter of 0.33"(8.3mm) Wrapped Straight bit (.25") used to route main channel Cove...Pickup Screws - (Pack of 4)
$3.50 - $5.50All screws are 1.5" (38.1mm) long. Some manufacturers supply pickup screws with their pickups, some do not...
All screws are #4-24, 1.5" (38.1mm) long including the head. Some manufacturers supply pickup screws with their pickups, some do not... Aguilar Pickups - No screws supplied Bartolini Pickups - No screws supplied Seymour Duncan...Passive Tone Control Module
$29.00Passive Tone Control Module can easily be added to any one or two pickup preamp, with one volume control, two volume controls, or a blend control and master volume control. The passive tone control will function when the preamp is in active...Prewired Passive Harness (Volume/Tone Stack, Blend)
$48.00Control Configuration Volume/Passive Tone Stack Blend Description This 2 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the G&L SB2 ® bass. These...Prewired Passive Harness (Volume/Tone Stack, Volume/Tone Stack)
Out of stock
$53.00Control Configuration Volume/Passive Tone Stack Blend Description This 2 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the G&L SB2 ® bass. These prewires...Prewired Passive Harness (Volume/Tone Stack, Blend) Solderless
$67.00Solderles Volume / Passive Tone Stack - Blend Control Configuration Volume/Passive Tone Stack Blend Description The pickup and ground conections are mader to the prewired harness...Concentric Stacked Black Aluminum Knob
$18.00Matches other Aluminum knobs.
Concentric Stacked Black Aluminum Knob Fits pots that have a lower shaft diameter of 8mm and upper shaft diameter of 6mm. Secures with set screw. Lower knob is roughly 3/4"(19mm) wide .3/8"(9.5mm) tall, upper knob is 5/8"(15.9mm) wide, and...Small Black Aluminum Knob
$9.002 Set screws. Fits standard split shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split shaft pots for tight fit.
Small Black Aluminum Knob 2 Set screws. Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split'shaft pots for tight fit. 1/4 inch diameter shaft hole. Dimensions for small knob are 0.5"(12.7mm)...Large Black Aluminum Knob
$9.50Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment and stability.The total height is 15.6mmThe diameter is 18.7mmThe skirt that covers the nut and washer on the underside is 4mm from the inside bottom surface for a nice clean appearance.
Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment...Black Plastic Knob Model 57
$3.25Low-profile, hard-touch, 2 color control knob with integral nut cover
Fits standard knurled, split'shaft pot.Plastic Soft Touch Push-On Knob - 63
$4.00Low-profile, soft-touch, 2 color control knob with integral nut cover
Rubberized plastic knob 63B with markerNoble 250k Volume/Tone Potentiometer Audio Taper Stack 6/8mm lower Solid Shaft
$20.00Stacked Concentric Pot, 250K/250K, With Nut, Lock and Dress Washer, Metric
Stacked Concentric Audio Taper Pot. 250k/250k. Includes Nut, Lock and Dress Washer. No Detent This pot can be used for: Volume/Volume Stack applications Volume/Tone Stack applicationsNoble 250k Blend M/N Taper as used in Aguilar preamps
$8.00Noble 250k MN Taper Blend Pot
Noble - 250 K Blend Pot - Z250K/X250K Blend - aka MN taper - as used in Aguilar preamps New Version *250k MN taper blend pot is standard equipment in Aguilar preamps. (MN taper blend pots are also used in other brands of preamps, such as Glockenklang) **The...Noble 50k EQ Potentiometer Linear Taper Center Detent 6mm Split Shaft
Out of stock
$4.00EQ Pot 50K Linear - for active systems
Noble EQ Pot 50K Linear Taper Potentiometer with Center Detent - for active systems Click Here For Dimensional DrawingNoble 50k EQ Potentiometer Linear Taper Push/Pull Center Detente 6mm Split Shaft
$18.0050K w/center detent for active systems
Noble 50K Linear Taper Pot w/center detente for active systems Click Here For Dimensional Drawing